Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Hours: | 5072 |
Serial Number: | CAT0730CA2T500142 |
Machine Location: | CHILLIWACK, BC |
Supplied by HeavyEquipmentData.com →
Body Capacities | |
Heaped (SAE 2:1) | 22.1 cu yd ( 17 cu m ) |
Struck | 17.7 cu yd ( 14 cu m ) |
Body Plate | |
Body Plate Type | High strength Brinell HB450 wear resistant steel |
Dump | |
Rated Payload | 68,343.3 lbs ( 31,000 kg ) |
Engine | |
Bore | 5.1 in ( 13 cm ) |
Displacement | 762.8 cu in ( 12,500 cu cm ) |
Engine Model | Cat C13 ACERT |
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | Cat C13 ACERT |
Gross Power - SAE J1995 | 375.0 hp ( 280 kw ) |
Net Power - ISO 14396 | 370.0 hp ( 276 kw ) |
Net Power - SAE J1349 | 367.0 hp ( 274 kw ) |
Peak Engine Torque Gross (SAE J1995) | 1,579.0 lbs ft ( 2,141 nm ) |
Peak Engine Torque Net (SAE J1349) | 1,564.0 lbs ft ( 2,120 nm ) |
Peak Engine Torque Speed | 1,200.0 rpm |
Stroke | 6.2 in ( 16 cm ) |
Operating Weights | |
Center Axle - Empty | 12,103.0 lbs ( 5,490 kg ) |
Center Axle - Loaded | 42,362.0 lbs ( 19,215 kg ) |
Center Axle - Rated Load | 27,249.0 lbs ( 12,360 kg ) |
Front Axle - Empty | 34,535.0 lbs ( 15,665 kg ) |
Front Axle - Loaded | 36,013.0 lbs ( 16,335 kg ) |
Front Axle - Rated Load | 7,231.0 lbs ( 3,280 kg ) |
Rear Axle - Empty | 11,552.0 lbs ( 5,240 kg ) |
Rear Axle - Loaded | 41,811.0 lbs ( 18,965 kg ) |
Rear Axle - Rated Load | 27,249.0 lbs ( 12,360 kg ) |
Total - Empty | 58,190.0 lbs ( 26,395 kg ) |
Total - Loaded | 120,186.0 lbs ( 54,516 kg ) |
Total - Rated Load | 61,729.0 lbs ( 28,000 kg ) |
Service Refill Capacities | |
Cooling System | 21.9 gal ( 83 l ) |
DEF Tank | 5.2 gal ( 20 l ) |
Engine Crankcase | 10.0 gal ( 38 l ) |
Final Drives/Differential | 33.0 gal ( 125 l ) |
Fuel Tank | 108.8 gal ( 412 l ) |
Hydraulic System | 29.1 gal ( 110 l ) |
Output Transfer Gear Box | 6.3 gal ( 24 l ) |
Transmission | 12.4 gal ( 47 l ) |
Sound Levels | |
Interior Cab | 76 dB(A) |
Standards | |
Brakes | ISO 3450 2011 |
Cab - FOPS | ISO 3449 Level II 2005 |
Cab - ROPS | ISO 3471 2008 |
Steering | ISO 5010 2007 |
Steering System | |
Lock to Lock | 4.75 seconds @ 60 rpm |
Transmission | |
Forward - 1 | 5.0 mph ( 8 kph ) |
Forward - 2 | 9.0 mph ( 14 kph ) |
Forward - 3 | 14.0 mph ( 23 kph ) |
Forward - 4 | 21.0 mph ( 34 kph ) |
Forward - 5 | 29.0 mph ( 47 kph ) |
Forward - 6 | 34.0 mph ( 55 kph ) |
Reverse - 1 | 6.0 mph ( 10 kph ) |
Turning Circle | |
Turning Dimensions - Aisle Width | 210.0 in ( 533 cm ) |
Turning Dimensions - Clearance Radius | 318.0 in ( 808 cm ) |
Turning Dimensions - Inside Radius | 153.0 in ( 389 cm ) |
Turning Dimensions - SAE Turning Radius | 294.0 in ( 747 cm ) |